Fide Freight

Pennsylvania Oversize Load Regulations and Permits

Pennsylvania oversize rules: legal limits (8 ft 6 in wide, 13 ft 6 in high), pilot cars, holiday bans, the Turnpike and how to get a PennDOT permit.

Updated 4 min read

Legal width
8 ft 6 in
Legal height
13 ft 6 in
Semitrailer length
53 ft
Kingpin to rear axle 41 ft or less
Gross weight
80,000 lb
First pilot car
Over 13 ft wide or 90 ft long
Super load
Over 16 ft wide or 201,000 lb
Travel hours
Sunrise to sunset, all week
PA Turnpike
Needs its own permit

Permits issued by

PennDOT Central Hauling Permit Office

Apply online
APRAS
Office hours
8:00 a.m.–4:30 p.m., Mon–Fri
On this page

In Pennsylvania, a truck and load can be 8 ft 6 in wide, 13 ft 6 in high and 80,000 lb gross without a permit, with a semitrailer up to 53 ft long. Anything bigger or heavier needs a special hauling permit from the Pennsylvania Department of Transportation (PennDOT). You order it online in PennDOT's Automated Permit Routing/Analysis System (APRAS); the Central Hauling Permit Office answers at (717) 787-4680.

A PennDOT permit doesn't cover the Pennsylvania Turnpike. The Pennsylvania Turnpike Commission issues its own permits, with its own size limits, escort rules, travel hours and holiday dates. Local roads need the local authority's permission too, so plan every leg before you promise a delivery date.

Key points:

  • Pilot cars start at over 13 ft wide, 90 ft long or 14 ft 6 in high. A load more than 15 ft past the rear also needs one.
  • Permit loads move from sunrise to sunset, seven days a week. In urbanized areas such as Philadelphia and Pittsburgh, they move only from 3 to 7:30 a.m., 9 a.m. to 4 p.m. and 7 p.m. to sunset.
  • No permit moves on six holidays or the day before each. For Thanksgiving 2026, the ban runs from noon November 25 to sunrise November 30.
  • A load over 16 ft wide, 160 ft long or 201,000 lb is a super load. Apply at least three weeks ahead and plan for a State Police or certified escort.
  • A single-trip permit costs $46, or $97 over 14 ft wide, plus 4 cents per ton-mile when overweight.

These are the most a truck and load can measure and weigh on Pennsylvania highways without a special hauling permit.

LimitLegal in PennsylvaniaWhere it comes from
Width8 ft 6 in, including the load75 Pa.C.S. § 4921
Height13 ft 6 in, including the load75 Pa.C.S. § 4922
Semitrailer length53 ft, with no more than 41 ft from the kingpin to the center of the rear axle or axle group75 Pa.C.S. § 4923
Overall lengthNo overall limit for a truck tractor and one trailer; 28 ft 6 in for each trailer in a double75 Pa.C.S. § 4923
Single truck length40 ft, including the load and bumpers75 Pa.C.S. § 4923
Load overhang3 ft past the front; 6 ft past the rear of the bed or body, except a nondivisible load on the rear vehicle of a combination75 Pa.C.S. § 4924
Gross weight80,000 lb, or less for vehicles with fewer axles75 Pa.C.S. § 4941
Steering axle20,000 lb75 Pa.C.S. § 4943
Other axles, combinations over 73,280 lb20,000 lb on a single axle; axle groups by the bridge formula, with two tandems allowed 34,000 lb each when the first and last axles are 36 ft or more apart75 Pa.C.S. § 4943

A 13 ft 6 in height doesn't guarantee clearance. Pennsylvania law doesn't require public authorities to provide clearance for vehicles that tall, so check every bridge and overpass on the route.

How large a Pennsylvania oversize permit load can be

Pennsylvania permit limits work in tiers: the bigger or heavier the load, the more PennDOT checks before it issues the permit.

  • Width: up to 16 ft on a regular permit. The fee steps up over 14 ft.
  • Length: up to 160 ft overall on a regular permit.
  • Height: PennDOT sets no super load height, so route clearance decides. Over 14 ft 6 in, attach a physical route survey (Form M-936ARS, valid 21 days) and run a height-pole pilot car. You must also notify affected utilities at least 24 hours ahead.
  • Gross weight: the general permit limit depends on axle count and tops out at 136,000 lb. Up to 201,000 lb is possible on a tractor and semitrailer with four axles each. That needs a bridge review and a supplemental application (Form M-936AS) at least 3 work days ahead.
  • Axle weights: 27,000 lb on a single axle. Groups are capped at 52,000 lb on two axles spread 4 to 8 ft, 63,000 lb on three spread 8 to 16 ft and 72,000 lb on four spread 12 to 24 ft. PennDOT's bridge engineer can approve up to 27,000 lb per axle in a group.
  • Wheels and brakes: no wheel can carry more than 800 lb per nominal inch of tire width. Any permit vehicle over 80,000 lb needs an engine, exhaust or hydraulic brake retarder.

A single-trip permit covers one trip in one direction and expires after five authorized weekdays. You can request one 3-weekday extension before it expires.

When a Pennsylvania load becomes a super load

PennDOT treats a load as a super load when it weighs more than 201,000 lb, is longer than 160 ft or is wider than 16 ft. Send a preliminary application to the Central Permit Office in APRAS at least three weeks before the move. It needs:

  • detailed routing, including city streets and township roads;
  • a manufacturer's or designer's certification that the item can't be made in smaller sections (Form M-936MDC);
  • written approval from every city on the route (Form M-936SLCA), even when every road is a state route;
  • a physical route survey (Form M-936ARS);
  • statements from rail, water or air carriers that they can't move it, if PennDOT asks.

PennDOT reviews every super load by hand, and permit services can't apply for one. If any axle tops 27,000 lb, you must shore each overloaded bridge the way PennDOT's bridge engineer approves and post security for damage.

Pennsylvania escort and pilot car requirements

Pennsylvania calls escort vehicles "pilot cars." The number depends on the load's size and how many lanes run in your direction, and your permit lists the exact requirement.

LoadPilot cars
Over 13 ft wide, on a road with two or more lanes in your direction1 behind
Over 13 ft wide, on a road with one lane in your direction1 ahead
Over 90 ft long, or a load more than 15 ft past the rear1 behind
Over 13 ft but not over 14 ft wide, and over 90 ft but not over 120 ft long1, placed where PennDOT decides
Over 13 ft wide and over 120 ft long2: 1 ahead and 1 behind
Over 14 ft 6 in high1 ahead with a height pole, 1,000 to 3,000 ft in front
Over 13 ft wide and over 14 ft 6 in high2: a height-pole car ahead and 1 behind
Oversize in an urbanized area during darkness2: 1 ahead and 1 behind
Can't hold 40 mph on a limited-access highway1 behind

Overweight permits can add pilot cars at bridges. When the permit makes the truck cross a two-way bridge alone or straddle lanes, pilot cars go ahead and behind on that bridge.

Pennsylvania pilot cars must:

  • run one or two flashing or revolving amber lights for the whole move;
  • carry "OVERSIZE LOAD" signs at least 5 ft wide and 1 ft high, with 8 in black letters on yellow, front and rear;
  • keep visual and two-way radio contact with the truck.

PennDOT certifies escort drivers only for super loads. A certified driver must be at least 21, with three years of escort experience, an 8-hour class, and defensive driving and flagger training. PennDOT accepts the class from Virginia, Georgia, North Carolina, Colorado and Utah, Florida or Washington. The driver still applies to PennDOT for the certification card.

When Pennsylvania requires a police escort

Every Pennsylvania super load needs an escort on top of its pilot cars. The Vehicle Code requires at least one certified escort vehicle, and PennDOT's regulation calls for a State Police or local police escort.

PennDOT lets certified escort vehicles replace the Pennsylvania State Police on super loads up to 18 ft wide and 260 ft long. The highway needs at least two lanes in the direction of travel, and the load must move with traffic. A wider or longer load, or one moving against traffic, needs a State Police escort. Local police escorts are accepted only on short moves. The Central Permit Office notifies the State Police at least 24 hours before the first movement. The permit holder pays for the escort.

When oversize loads can move in Pennsylvania

Pennsylvania permit loads move from sunrise to sunset every day of the week, using National Weather Service times. PennDOT's regulation still lists a ban on Saturday afternoons and Sundays. The Vehicle Code (75 Pa.C.S. § 4962) overrides it, as PennDOT's Form M-938 notes.

  • Around the clock: a load of up to 135,000 lb can move 24 hours a day, seven days a week, at prevailing speeds. It must be no more than 10 ft wide, within legal height and length, and out of bad weather.
  • Urbanized areas: inside the areas mapped on Form M-938, permit loads move only from 3 to 7:30 a.m., 9 a.m. to 4 p.m., and 7 p.m. to sunset. The areas include Philadelphia and its suburbs, Pittsburgh, Harrisburg, Allentown, Scranton and Erie, and routes along their edges count as inside.
  • Before sunrise in urbanized areas: an oversize load needs extra lighting visible from 1,000 ft on all sides, plus pilot cars ahead and behind.
  • Pittsburgh tunnels: the Fort Pitt, Squirrel Hill and Liberty Tunnels take permit loads only from 9 a.m. to 4 p.m.
  • Slow loads: a load that can't hold 40 mph can use limited-access highways in urbanized areas only from 9 a.m. to 4 p.m., with a pilot car behind.
  • Weather: permits aren't valid on snow-covered or icy roads or in visibility under 1,000 ft. Moves also stop in wind that pushes the trailer's wheels more than 6 in off the truck's path.
  • Spacing: keep at least 1,000 ft between permitted oversize vehicles traveling the same way.

The driver carries the permit and a copy of Form M-938, which holds the permit conditions and the urbanized area maps.

Pennsylvania holiday restrictions

PennDOT allows no permit movement on New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and Christmas Day, or on the day before each. PennDOT publishes the exact windows each year, and they run through the nearby weekend.

HolidayNo permit movement (PennDOT)
Thanksgiving 2026Noon, November 25, to sunrise, November 30, 2026
Christmas 2026Noon, December 24, to sunrise, December 28, 2026
New Year's Day 2027Noon, December 31, 2026, to sunrise, January 4, 2027
Memorial Day 2027Noon, May 28, to sunrise, June 1, 2027
Independence Day 2027Noon, July 2, to sunrise, July 6, 2027
Labor Day 2027Noon, September 3, to sunrise, September 7, 2027

Pennsylvania Turnpike permits and hours

The Pennsylvania Turnpike Commission requires its own permit for a load over 10 ft wide, 13 ft 6 in high, 85 ft long, 100,000 lb or 22,400 lb on an axle, or one that extends 5 ft past the front or 15 ft past the rear. It costs $37 plus 24 cents per ton-mile on all weight over 80,000 lb. Allow 10 days for a super load review. A State Police escort is required over 16 ft wide or 230 ft long.

Turnpike permit loads keep shorter hours. From Memorial Day to Labor Day, they move from dawn to dusk Monday to Thursday and from dawn to noon on Friday. The rest of the year, they move from dawn to dusk Monday to Friday and from dawn to noon on Saturday. The Turnpike's holiday bans also run longer than PennDOT's.

Turnpike holidayNo permit movement
Thanksgiving 20265:00 a.m. Tuesday, November 24, to 11:00 p.m. Sunday, November 29, 2026
Christmas and New Year's5:00 a.m. Friday, December 18, 2026, to 11:00 p.m. Friday, January 1, 2027

How to get a Pennsylvania oversize permit

Pennsylvania permits are ordered online in APRAS once your company is registered with PennDOT.

  1. Register with PennDOT. Send the Central Permit Office a registration agreement (Form M-936RA) and a surety bond (Form M-936B) of at least $2,000, or $5,000 for monthly billing.
  2. Set up APRAS. Register your company as a business partner on the APRAS login page, then a delegate administrator once PennDOT approves it. Motor carriers add their USDOT number before applying.
  3. Insure the move. Carry liability coverage of at least $250,000 per person and $1 million per occurrence. Contractors, including pilot car owners, need it too.
  4. Apply. Enter the dimensions, weights and axle spacings, and attach any route survey or supplemental application. APRAS issues most permits automatically after its route analysis and sends complex ones to PennDOT staff. Its Bid Routing tool lets you test a route first.
  5. Carry the permit. Keep the permit and Form M-938 in the truck, plus a Turnpike permit if the route uses the Turnpike.

Without an APRAS account, you can use a permit service from PennDOT's list, except for super loads.

Pennsylvania oversize permit fees

PennDOT's fee schedule, effective July 1, 2025, sets these amounts.

Permit or feeAmount
Single-trip permit, up to 14 ft wide$46
Single-trip permit, more than 14 ft wide$97
Overweight charge4 cents per ton-mile, for each ton over the registered gross weight
Super load preliminary application$68, plus $12 for each county on the route
State Police escortBilled separately
Refund processing fee, for the unused ton-mile or escort part of a permit$52
Annual construction equipment permit$707

The Vehicle Code and PennDOT's regulation still print older amounts. They list $35 and $71 for the two width tiers (75 Pa.C.S. § 1942) and $38 for refund processing (§ 1947). They also list $50 plus $10 per county for a super load preliminary application (67 Pa. Code § 179.9). PennDOT's current schedule lists the higher amounts above.

The annual construction equipment permit suits contractors who move the same machines often. It covers excavating, land-clearing, paving and road-building equipment within 125 miles of the origin on the permit. Its limits are 11 ft wide, 13 ft 6 in high, 83 ft long and 80,000 lb. Loads up to 10 ft wide under it can move 24/7.

Planning an oversize move through Pennsylvania

Pennsylvania's 13 ft 6 in height matches all six of its neighbors, and its 8 ft 6 in width matches them on main highways. Off its qualifying and access highways, New York allows only 8 ft in New York City and on roads with lanes under 10 ft. West Virginia allows only 8 ft on local roads with lanes under 10 ft.

Trailer length is where routes differ most. Pennsylvania allows a 53 ft semitrailer with a 41 ft kingpin-to-rear-axle limit. New York allows 53 ft only on qualifying and access highways, and in New York City only on parts of I-95, I-295 and I-495, with 48 ft elsewhere. Maryland allows 53 ft on Interstates and its truck routes, with 48 ft elsewhere. New Jersey allows trailers over 48 ft only on the network NJDOT designates. Check every state on the route; see legal limits in all 50 states.

Lead time in Pennsylvania depends on the tier. Most permits issue in APRAS once the route analysis passes. A heavy load needs its supplemental application 3 work days ahead. A super load needs three weeks, city approvals and an escort booked at least 24 hours out. Then fit the move inside the daylight and urbanized-area windows, and clear of holiday bans such as noon November 25 to sunrise November 30, 2026.

Moving a load into, out of or across Pennsylvania? Request a heavy haul quote with the dimensions, weight and route, or see our over dimensional freight service.

Sources

Official sources, each checked on November 20, 2026.

  1. 1.PennDOT: Apply for a PennDOT Hauling Permit
  2. 2.PennDOT: Form M-938: Pennsylvania Urbanized Area Map and permit conditions (67 Pa. Code §§ 179.10 and 179.11)
  3. 3.PennDOT: 2026 Holiday Travel Restrictions (Oversize/Overweight Movement in PA)
  4. 4.PennDOT: 2027 Holiday Travel Restrictions (Oversize/Overweight Movement in PA)
  5. 5.PennDOT: Permit Fees, effective July 1, 2025
  6. 6.PennDOT: Number of Pilot Cars Cheat Sheet
  7. 7.PennDOT: Certified Escort Policy for Superload Moves
  8. 8.PennDOT: Load Type Quick Reference Guide (updated October 2025)
  9. 9.PennDOT: APRAS FAQ
  10. 10.PennDOT: Getting Started with APRAS
  11. 11.PennDOT: Contact directory: Central Hauling Permit Office
  12. 12.Pennsylvania Code: 67 Pa. Code Chapter 179: Oversize and Overweight Loads and Vehicles (§§ 179.1, 179.4, 179.7 to 179.10)
  13. 13.Pennsylvania General Assembly: 75 Pa.C.S. Chapter 49: Size, Weight and Load (§§ 4921 to 4924, 4941, 4943 and 4962)
  14. 14.Pennsylvania General Assembly: 75 Pa.C.S. § 1942: Special hauling permits as to weight and size (fees)
  15. 15.Pennsylvania General Assembly: 75 Pa.C.S. § 1947: Refund of certain fees
  16. 16.Pennsylvania General Assembly: 75 Pa.C.S. § 3108: Drivers of certified escort vehicles (super load definition)
  17. 17.Pennsylvania Turnpike Commission: Commercial Permits and Restrictions

Fide Freight is a member of the Specialized Carriers & Rigging Association (SC&RA).

Oversize load in Pennsylvania? We'll plan it.

Permits, escorts, route surveys and specialized trailers, planned state by state and priced in one quote.