In New Hampshire, a truck and load can be 8 ft 6 in wide, 13 ft 6 in high including the load and 80,000 lb gross without a permit. A semitrailer can be 53 ft long on the Interstate and designated routes, or 48 ft elsewhere. Anything bigger needs an oversize/overweight permit from the New Hampshire Department of Transportation (NHDOT), which you order online in NHDOT Permits or by phone at (603) 271-2691.
New Hampshire's legal height is also the line for its biggest permit category. Under NHDOT's permit rule, any load over 13 ft 6 in high, 15 ft wide, 110 ft long or 149,999 lb is a "supermove," which brings route surveys and engineering review. That rule, Tra 304, expired on April 23, 2025, under the state's 10-year limit on rules, though NHDOT and the State Police still cite it. Oversize loads also can't move on weekends, except approved supermoves and Saturday mornings under NHDOT's seasonal program.
Key points:
- One escort starts at 12 ft wide, 90 ft long, over 14 ft high or 15 ft of overhang. State Police escorts start at 100 ft long or over 14 ft wide.
- Loads over 110 ft long or 13 ft 6 in high need a route survey that you provide.
- Oversize loads move in weekday daylight, and not on 10 listed holidays plus the day after Thanksgiving.
- A dimension permit costs $6, overweight fees start at $5.50, and an annual permit is $115 per unit.
New Hampshire legal limits without a permit
These are the most a truck and load can measure and weigh on New Hampshire highways without a permit.
| Limit | Legal in New Hampshire | Where it comes from |
|---|---|---|
| Width | 8 ft 6 in (102 in) | RSA 266:12 |
| Height | 13 ft 6 in, including the load | RSA 266:10 |
| Semitrailer length | 53 ft on the Interstate and designated routes, if the kingpin is no more than 41 ft from the rear axle and the trailer has a rear underride guard; 48 ft elsewhere | RSA 266:11(II) |
| Doubles | 28 ft for each trailer | RSA 266:11(III) |
| Single truck length | 45 ft, including bumpers | RSA 266:11(I) |
| Load overhang | A load 4 ft or more past the bed or body needs a red light at night and a red flag at least 12 in square by day | RSA 266:46 |
| Gross weight | 80,000 lb on a tractor-semitrailer with five or more axles, within the weight formula | RSA 266:18; RSA 266:18-a |
| Axle weights | Up to 73,280 lb gross, a tractor-semitrailer with five or more axles can carry 22,400 lb per single axle and 36,000 lb per tandem. Above that, the weight formula applies, and on the Interstate axles are limited to 20,000 lb single and 34,000 lb tandem. | RSA 266:18; RSA 266:18-a |
NHDOT's own permit application lists 48 ft as the legal semitrailer length for a combination; the statute allows 53 ft only on the network described above.
New Hampshire also lets trucks certified by the Department of Safety carry up to 99,000 lb on six or more axles off the Interstate. That certification is mainly for divisible loads, and NHDOT says carriers can't combine it with an oversize/overweight permit, which is issued for the actual weight and dimensions.
How large a New Hampshire oversize permit load can be
NHDOT issues routine single-trip permits up to 15 ft wide, 110 ft long and 13 ft 6 in high, and up to 149,999 lb. NHDOT Permits can issue some of these automatically, based on the route and current restrictions.
- Route surveys: a load over 110 ft long or over 13 ft 6 in high needs a route survey. NHDOT Permits generates the form; you or a route survey company drive the route, record every obstruction and upload the signed form. A survey can be reused for the same load and route for up to 30 days.
- Bridge checks: NHDOT runs a live load analysis on the bridges along the route for every overweight permit, using the axle weights and spacings you enter.
- Validity: a single-trip permit is good for 5 business days, or 10 for a round trip by reverse route.
When a New Hampshire load becomes a supermove
NHDOT's rule classifies a load as a supermove if it's over 15 ft wide, over 110 ft long, over 13 ft 6 in high or over 149,999 lb. The rule lets NHDOT require an engineering inspection report from a professional engineer licensed in New Hampshire, unless it already has current engineering information for the route.
NHDOT Permits explains how weight reviews work in practice. Loads from 150,000 to 300,000 lb go to NHDOT's Bureau of Bridge Design for review. Loads over 300,000 lb need an Independent Engineering Report from a New Hampshire-licensed professional civil engineer, uploaded with the application. Some moves also need a traffic control plan from a New Hampshire-registered civil engineer. A supermove permit names the date and time the move can run, which can be any time of day on a weekday or a weekend.
New Hampshire escort and pilot car requirements
The number of escorts depends on the load's width, length, height and overhang. NHDOT's rule sets these triggers for loads other than manufactured housing and modular buildings.
| Load | Escorts required |
|---|---|
| 12 ft to under 14 ft wide | 1 non-police escort |
| Over 14 ft wide | 2 State Police escorts |
| 90 ft long or more | 1 non-police escort |
| 100 ft long or more | 1 State Police escort, on top of the non-police escort, unless the State Police waive it |
| Over 14 ft high | 1 non-police escort |
| Front or rear overhang of 15 ft or more | 1 non-police escort |
| Rear overhang of 15 ft or more and width of 12 ft or more | 2 non-police escorts |
| Move needs a full or partial road closure | 3 State Police escorts |
A flagged load under 12 ft wide and 90 ft long, with less than 15 ft of overhang and no more than 14 ft high, needs no escort. NHDOT can require more escorts after looking at the route, the traffic and the load.
New Hampshire's rule doesn't call for a pilot car certificate, but it does set equipment and driving rules for non-police escorts:
- a registered and inspected vehicle the size of a compact car or larger;
- a roof-mounted flashing or strobe amber light visible for 1,000 ft in all directions;
- "OVERSIZE LOAD" signs on the front and back, or one sign above the roofline, at least 5 ft wide and 12 in high, with 10 in black letters on yellow;
- a two-way radio on the same frequency as the load and every other escort, including State Police;
- headlights on low beam, and a single escort ahead of the load on undivided highways and behind it on divided highways.
When New Hampshire requires a police escort
NHDOT's rule requires State Police escorts at 100 ft long, over 14 ft wide and for any road closure, as shown above. On a two-way highway, the police escort stops all traffic while the load crosses any bridge 24 ft wide or narrower. NHDOT's seasonal program also allows night moves for NHDOT construction projects, each with a State Police escort. State Police ask for 48 hours' notice for those: call (800) 443-5268 or (603) 223-3861, and give the escorts a paper copy of the permit before the move.
When oversize loads can move in New Hampshire
New Hampshire limits oversize loads to weekday daylight, with Saturday mornings added during the seasonal program.
- Daylight: from 30 minutes before sunrise to 30 minutes after sunset.
- Weekends: oversize permits aren't valid on weekend days, except for supermoves and NHDOT's seasonal program.
- Seasonal Saturday mornings: in 2026 the program runs from April 18 to November 21, and permit loads can also travel on Saturdays until noon. From May 30 to August 29, 2026, Saturday travel ended at 9 a.m. on I-95 and at noon on other state roads. Choose the Saturday morning option in the permit application. The program doesn't cover holidays or holiday weekends.
- Overweight only: a load that's only overweight and runs at normal traffic speed isn't limited by date or time of day.
- Weather: no permit move in fog, haze, heavy rain, freezing rain, sleet, ice, snow, wind or other inclement weather. A load already moving must leave the highway at the first safe place.
- Traffic: when 7 or more vehicles stack up behind the load, the load and escorts must pull over at the nearest safe spot.
New Hampshire holiday restrictions
Permits aren't valid on New Year's Day, Martin Luther King Jr. Civil Rights Day, Presidents' Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving and the day after, or Christmas. A holiday on a Saturday also closes the Friday before, and a holiday on a Sunday closes the Monday after. NHDOT's 2026 list puts no travel restriction on Juneteenth.
These are the next restricted days, from NHDOT's 2026 and 2027 holiday letters. The permit office is closed on each of them.
| Holiday | No oversize/overweight permit travel |
|---|---|
| Thanksgiving | Thursday, November 26, and Friday, November 27, 2026 |
| Christmas | Friday, December 25, 2026 |
| New Year's Day | Friday, January 1, 2027 |
Outside the seasonal program, weekends are closed to oversize loads anyway. Each of these holidays therefore starts a stretch of three or four days with no oversize travel.
New Hampshire spring thaw limits
In spring, NHDOT posts sections of state highways against heavy loads. On a posted section, the most a vehicle can weigh is 30,000 lb gross, or 300 lb for each inch of total tire width touching the road, whichever is less. Every permit is subject to seasonal postings, and NHDOT Permits shows active postings and construction restrictions when it builds the route.
How to get a New Hampshire oversize permit
New Hampshire permits are ordered online in NHDOT Permits, which runs 24 hours a day, or on a paper application by mail or in person.
- Open an account. Choose "Create account" on the NHDOT Permits login page. A carrier with a valid USDOT number can set one up right away. NHDOT approves accounts for permit services and for carriers with neither a USDOT number nor a New Hampshire registration.
- Apply in the right name. The permit goes to the registered owner of the truck that will do the hauling. An out-of-state truck can't get a permit for a move between two New Hampshire points unless it's registered under the International Registration Plan with New Hampshire on its cab card.
- Enter the load and route. NHDOT Permits picks a route from your dimensions, weight and current restrictions, and runs the bridge analysis. Upload a route survey or engineering report if the load needs one. Applications that can't issue automatically are handled in the order received, 8:00 a.m. to 4:00 p.m., Monday through Friday.
- Pay. Online permits are paid by credit or debit card. By mail, pay by check or money order to "Treasurer, State of New Hampshire." Permit fees aren't refundable.
- Carry the permit. Keep the permit, paper or electronic, in the truck. Get permission from the town or city for any local roads, because an NHDOT permit covers only state highways. Before driving, the driver fills out the New Hampshire State Police oversize/overweight checklist (form DSSP 404).
NHDOT's rule gives the permit office up to 30 days to decide on a complete application, so don't leave a supermove to the last week.
New Hampshire oversize permit fees
New Hampshire's permit fees are set by statute (RSA 266:22): a flat fee for size and a weight-based fee for overweight loads.
| Permit or fee | Amount |
|---|---|
| Over-length, over-width or over-height, or any combination | $6.00 |
| Overweight, vehicle and load up to 50,000 lb | $5.50 |
| Overweight, 50,001 to 60,000 lb | $6.50 |
| Overweight, 60,001 to 70,000 lb | $7.50 |
| Overweight, 70,001 to 80,000 lb | $8.50 |
| Overweight, 80,001 to 90,000 lb | $9.50 |
| Overweight, 90,001 to 100,000 lb | $10.50 |
| Overweight, each additional 10,000 lb | $2.00 more |
| Annual permit, statewide, per unit | $115 |
| Annual permit within 100 miles of home, per unit (New Hampshire-based and registered only) | $60 |
New Hampshire annual permits for repeat moves
If you move the same kind of equipment often, an annual permit can replace single-trip permits. It covers a single truck up to 45 ft long, or a tractor, trailer and load up to 75 ft long. Either can be up to 10 ft 6 in wide and 13 ft 6 in high, at no more than the truck's registered weight. The permit is valid for one year on class I and II highways in the area it names, but not on bridges or roads posted below the load's weight. For a bigger load, the holder orders a single-trip supplemental. Supermoves can't run on an annual permit.
Planning an oversize move through New Hampshire
New Hampshire, Vermont and Massachusetts all set legal height at 13 ft 6 in, with an 8 ft 6 in width and a 53 ft semitrailer limit. Maine matches the width and trailer length but lets the load ride 6 in above its 13 ft 6 in vehicle height. A 13 ft 10 in load that runs legally on most Maine roads becomes a supermove at the New Hampshire line, with a route survey and possible engineering review. Compare every state on the route in legal limits in all 50 states, and see the Maine, Vermont and Massachusetts guides.
Trailer length is a second trap. New Hampshire's 53 ft limit applies only on the Interstate and designated routes, and only if the kingpin sits no more than 41 ft from the rear axle. Maine allows up to 45 ft 6 in, so check the kingpin setting before a 53 ft trailer crosses into New Hampshire.
Lead time comes from the supermove rules and the calendar. Route surveys, Bridge Design reviews and engineering reports all have to be done before the permit issues, and weekends are closed to oversize loads for most of the year. For a move across several New England states, NHDOT's rule says a New England Transportation Consortium (NETC) permit recognized in New Hampshire needs no extra New Hampshire permit. Maine's permit rule, though, notes that the NETC multistate process is currently suspended.
Moving a load into, out of or across New Hampshire? Request a heavy haul quote with the dimensions, weight and route, or see our over dimensional freight service.
