Fide Freight

North Carolina Oversize Load Regulations and Permits

North Carolina oversize rules: legal limits (8 ft 6 in wide, 14 ft high), escort triggers, holiday and city rush-hour limits and how to get an NCDOT permit.

Updated 8 min read

Legal width
8 ft 6 in
Legal height
14 ft
Semitrailer length
53 ft
Gross weight
80,000 lb
First escort
Over 12 ft wide
Superload from
Over 132,000 lb
Around-the-clock travel
Up to 10 ft wide, 112,000 lb
City curfew, over 12 ft wide
7–9 a.m., 4–6 p.m.

Permits issued by

NCDOT Oversize/Overweight Permit Unit

Apply online
PIMS
Office hours
Phone 7:00 a.m.–4:00 p.m., Mon–Fri
On this page

In North Carolina, a truck and load can be 8 ft 6 in wide, 14 ft high and 80,000 lb gross without a permit, with a semitrailer up to 53 ft long. Anything bigger or heavier needs an oversize/overweight permit from the North Carolina Department of Transportation (NCDOT) Oversize/Overweight Permit Unit. You order it online in NCDOT's Permit Information Management System (PIMS) or by phone at (888) 574-6683.

North Carolina's 14 ft legal height is 6 in more than the limit in any neighboring state. A load can be legal on the North Carolina side of the line and need a height permit on the other.

Key points:

  • Escorts start at over 12 ft wide, 14 ft 5 in high, 110 ft long or 149,999 lb, and every escort driver must be certified.
  • Permit loads move from sunrise to sunset, seven days a week. Loads up to 10 ft wide and 112,000 lb, with legal height and length, can move around the clock.
  • Loads over 12 ft wide can't travel near Charlotte, Raleigh, Durham or Chapel Hill from 7 to 9 a.m. or 4 to 6 p.m.
  • Permit moves stop from noon on the weekday before until noon on the weekday after Independence Day, Thanksgiving Day and Christmas Day.
  • A single-trip permit costs $12 for each dimension over the legal limit. Superloads, over 132,000 lb, need 10 business days.

These are the most a truck and load can measure and weigh on North Carolina highways without a permit.

LimitLegal in North CarolinaWhere it comes from
Width8 ft 6 in (102 in)N.C. Gen. Stat. § 20-116(a)
Height14 ft, unladen or with loadN.C. Gen. Stat. § 20-116(c)
Semitrailer length53 ft in a truck-tractor and semitrailer combination, with no overall length limit; a trailer over 48 ft needs 41 ft or less from the kingpin to the rear axle or the middle of a rear tandemN.C. Gen. Stat. § 20-115.1(b), (d)
Other combinations60 ft overallN.C. Gen. Stat. § 20-116(e)
Single vehicle length40 ftN.C. Gen. Stat. § 20-116(d)(1)
Load overhang3 ft past the front of the vehicle; 14 ft past the rear of the bed or body, with a red or orange flag past 4 ftN.C. Gen. Stat. §§ 20-116(f), 20-117(a)
Gross weight80,000 lb, set by the distance between the first and last axlesN.C. Gen. Stat. § 20-118(b)(3)
Axle weights20,000 lb single, 38,000 lb tandemN.C. Gen. Stat. § 20-118(b)(1), (2)

A 14 ft legal height doesn't guarantee clearance. State law doesn't require anyone to raise a bridge, wire or other structure for a vehicle over 12 ft 6 in. The owner or operator of such a vehicle is liable for any damage it causes.

How large a North Carolina oversize permit load can be

NCDOT issues single-trip permits for non-divisible loads, meaning items that can't be taken apart to meet legal limits. NCDOT's single-trip publication (ST-1) sets these maximums.

  • Width: 16 ft 11 in, though NCDOT's rules cap single-trip permits at 15 ft (see the superload section below). Apply at least two business days ahead for a load over 16 ft wide.
  • Height: set by the vertical clearances on the route. Apply at least two business days ahead for a load over 14 ft high.
  • Length: ST-1 sets no overall limit. NCDOT's rules name 105 ft as the general maximum and let the Central Permit Office approve longer loads after a route review.
  • Gross weight: 112,000 lb on five axles, 120,000 lb on six and 132,000 lb on seven, with at least 51 ft between the first and last axles. A shorter wheelbase drops these to 94,500, 108,000 and 122,000 lb.
  • Axle weights: 20,000 lb steer, 25,000 lb single, 50,000 lb tandem, 60,000 lb tridem and 68,000 lb for four or more axles.

The bridges on the route set the final weight. NCDOT can also require a surety bond for a move that might damage a road or bridge. The mover pays to remove and replace traffic signals, signs and utility lines. State law treats one to three steel coils, and electric vehicle batteries up to 132,000 lb, as non-divisible loads.

When a North Carolina load becomes a superload

NCDOT's superload publication (SL-6) applies to loads over 132,000 lb gross or 17 ft or more wide. NCDOT's rules set a lower width trigger. They cap single-trip permits at 15 ft and require a superload permit at 15 ft or more (19A NCAC 02D .0601 and .0602). The rules also require one when an axle or axle group is over the permit limits. For a load 15 to 17 ft wide, ask the permit unit which permit applies before you set a date.

Apply at least 10 business days before the move, with a $100 nonrefundable application fee, to allow for NCDOT's internal and bridge engineering reviews. Wait at least 16 business hours before calling about the status. NCDOT issues the permit when you call to activate it, unless you checked "Issue Upon Approval" on the application. Approved applications and bridge studies expire after 90 days.

North Carolina escort and pilot car requirements

North Carolina's escort triggers depend on the load's size and weight and, for width, on whether the road has two lanes or more. These come from NCDOT's escort publication (E-9), revised August 2024.

LoadTwo-lane, two-way roadMulti-lane highway
Over 12 ft wide1 front1 rear
Over 16 ft wide3 escorts, one from the State Highway Patrol3 escorts, one from the State Highway Patrol
Over 14 ft 5 in high1 front pole car with a height pole1 front pole car with a height pole
Over 110 ft long1 rear1 rear
Over 150 ft long1 front and 1 rear1 front and 1 rear
Rear overhang of 15 ft or more1 rear1 rear
Over 149,999 lb1 front1 front

The permit states the final escort count, and NCDOT can add escorts for weight, size, weather, location or route. NCDOT's permit handbook also lists front and rear escorts for loads over 14 ft wide on two-lane roads.

Every escort driver in North Carolina must carry an approved escort vehicle operator certification. NCDOT certifies drivers who pass an 8-hour course at a North Carolina community college or an approved third-party provider, and the certification lasts four years. Holders of a Class A commercial driver's license can take the exam without the course. NCDOT also accepts active certifications from Arizona, Colorado, Florida, Georgia, Minnesota, Oklahoma, Pennsylvania, Utah, Virginia and Washington. Running without the required certified escorts carries a $1,500 civil penalty.

North Carolina escort vehicles must:

  • be a single vehicle with a gross vehicle weight rating of 2,000 to 26,000 lb, with no trailer and no hazardous materials;
  • show a yellow "WIDE LOAD" or "OVERSIZE LOAD" banner across the bumper, in black letters 10 in high;
  • run a roof-mounted flashing amber light visible from 500 ft in all directions, with headlights on;
  • keep two-way radio contact with the truck and other escorts, and carry a stop/slow paddle, safety vest, three reflective triangles and a 5 lb fire extinguisher.

When North Carolina requires a police escort

A load over 16 ft wide needs three escorts, and one must be a North Carolina State Highway Patrol (SHP) officer. On those moves, the SHP escort decides the travel time and how many permit loads move together.

When oversize loads can move in North Carolina

North Carolina permits allow movement from sunrise to sunset, Monday through Sunday, unless the permit says otherwise.

  • Around the clock: a load up to 112,000 lb and 10 ft wide, with legal height and length, can move 24 hours a day, every day. At night, a load over 102 in and up to 120 in wide needs at least two amber lamps at its widest points.
  • Port cargo: state law bars NCDOT from banning after-sunset travel for permitted shipments to or from international ports. NCDOT can still restrict moves it finds unsafe.
  • Weekends: allowed, except in the holiday windows below.
  • Weather: no moves when visibility is under 500 ft or when the Division of Highways or law enforcement considers travel unsafe.
  • Convoys: permit loads from the same company or origin must travel at least 2 miles apart.

Loads over 12 ft wide can't travel within a 10-mile radius of the city limits of Charlotte, Raleigh, Durham or Chapel Hill from 7 to 9 a.m. or 4 to 6 p.m.

North Carolina holiday restrictions

NCDOT's rule bars permit moves from noon on the weekday before until noon on the weekday after Independence Day, Thanksgiving Day and Christmas Day. When one falls on a weekend, the window runs from noon Friday to noon Monday. NCDOT's 2026 schedule applies the window to over-width, over-height and over-length loads and to combinations over 112,000 lb gross.

These are the remaining windows for 2026.

HolidayNo permit moves
Thanksgiving Day, November 26, 2026Noon Wednesday, November 25, until noon Friday, November 27, 2026
Christmas Day, December 25, 2026Noon Thursday, December 24, until noon Monday, December 28, 2026

No other holidays are restricted. In 2026, the permit office closed on New Year's Day, Martin Luther King Jr. Day, Good Friday, Memorial Day, Labor Day and Veterans Day, but loads could move on permits issued beforehand. The office is also closed November 26–27 and December 24, 25 and 28, 2026, so order permits for those weeks early.

How to get a North Carolina oversize permit

North Carolina permits are ordered online in PIMS or by phone.

  1. Reduce the load. NCDOT expects every load to be reduced to its smallest possible size and weight. One item qualifies for an overweight permit; several items on one truck don't.
  2. Open a PIMS account. Email the PIMS Online Account Request Form to PIMSaccounting@ncdot.gov. NCDOT stopped accepting faxed applications on August 1, 2025.
  3. Apply. Order in PIMS, 24 hours a day, or call (888) 574-6683 from 7:00 a.m. to 4:00 p.m., Monday through Friday. Choose option 1 for single-trip, 2 for superload or 3 for annual permits. NCDOT aims to process single-trip applications received by 3:00 p.m. the same working day.
  4. Pay. NCDOT takes credit cards, company checks, certified checks and money orders, but not personal checks. You can also open an escrow account.
  5. Carry the permit. A single-trip permit is issued to the registered owner of the power unit and is valid for 10 calendar days for one trip. Request any return trip on the original application, and keep the permit in the truck.

North Carolina oversize permit fees

North Carolina sets its permit fees in statute.

Permit or feeAmount
Single-trip permit$12 for each dimension over the legal limit: width, height, length or weight
Weight over 132,000 lb$3 per 1,000 lb over 132,000 lb, on top of the dimension fees
Superload or engineering-study application$100, nonrefundable
Annual permit, general non-divisible loads$185 per vehicle
Annual permit, house trailers or trailer frames$200 per vehicle

North Carolina annual permits for repeat moves

An annual permit can replace single-trip permits if you move the same kind of load often. NCDOT's annual permit covers loads up to 12 ft wide, legal height and 105 ft long for one year. Up to 90,000 lb, with at least 51 ft between the first and last axles, it's valid statewide except on posted roads and bridges and NCDOT's restricted routes. Heavier loads, up to 132,000 lb, can use only the routes named on the permit, up to 10 of them.

Planning an oversize move through North Carolina

North Carolina's 14 ft legal height is 6 in more than the 13 ft 6 in limit in Virginia, Tennessee, Georgia and South Carolina. A load that runs legal at 13 ft 9 in in North Carolina needs a height permit in every neighboring state. Virginia, Georgia and South Carolina also allow a 53 ft semitrailer. Tennessee's limit is 52 ft, measured from the kingpin to the rear of the trailer. See legal limits in all 50 states.

Lead time in North Carolina depends on size. A routine single-trip permit can issue the same working day. A load over 14 ft high or 16 ft wide needs two business days, and a superload needs 10. Check escorts early, too: South Carolina and Tennessee aren't on NCDOT's reciprocity list, so escorts certified only there need a North Carolina certification.

The mountains take extra routing work. NCDOT's restricted-route list keeps annual-permit loads over 10 ft wide off more than 40 road segments, mostly in western North Carolina. They include US-19W, US-129 and US-441 to the Tennessee line and US-178 to the South Carolina line. To use one, apply for a single-trip permit. Near Charlotte, Raleigh, Durham and Chapel Hill, time wide loads to miss the 7 to 9 a.m. and 4 to 6 p.m. limits.

Moving a load into, out of or across North Carolina? Request a heavy haul quote with the dimensions, weight and route, or see our over dimensional freight service.

Sources

Official sources, each checked on November 20, 2026.

  1. 1.NCDOT: Oversize/Overweight Trucking Permits
  2. 2.NCDOT: Permit Information Management System (PIMS): how to apply, phone lines and processing times
  3. 3.NCDOT: Publication ST-1: Single Trip Permits (rev. November 2019)
  4. 4.NCDOT: Publication SL-6: Superload Permits (rev. January 2020)
  5. 5.NCDOT: Publication E-9: Escort Vehicles (rev. August 2024)
  6. 6.NCDOT: Publication AN-1: Annual Permits (rev. July 2024)
  7. 7.NCDOT: Oversize/Overweight Permit Office Holiday Closings 2026
  8. 8.NCDOT: Escort Vehicle Operator Reciprocation Agreement (rev. August 2019)
  9. 9.NCDOT: Escort Vehicle Operator Certification: General Information and Instructions (rev. March 2025)
  10. 10.NCDOT: Publication PF-8: Restricted Routes for Annual Permits (rev. September 2019)
  11. 11.NCDOT: Oversize/Overweight Permit Handbook
  12. 12.North Carolina General Assembly: G.S. 20-115.1: Limitations on tandem trailers and semitrailers
  13. 13.North Carolina General Assembly: G.S. 20-116: Size of vehicles and loads
  14. 14.North Carolina General Assembly: G.S. 20-117: Flag or light at end of load
  15. 15.North Carolina General Assembly: G.S. 20-118: Weight of vehicles and load
  16. 16.North Carolina General Assembly: G.S. 20-119: Special permits for vehicles of excessive size or weight; fees
  17. 17.North Carolina Office of Administrative Hearings: 19A NCAC 02D .0601: Permit Application and Administration
  18. 18.North Carolina Office of Administrative Hearings: 19A NCAC 02D .0602: Permits, Issuance Requirements
  19. 19.North Carolina Office of Administrative Hearings: 19A NCAC 02D .0607: Permits, Movement and Travel Requirements

Fide Freight is a member of the Specialized Carriers & Rigging Association (SC&RA).

Oversize load in North Carolina? We'll plan it.

Permits, escorts, route surveys and specialized trailers, planned state by state and priced in one quote.